080bbe16dc9cd8d1b2bfe93100d63997edf2db9d
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  SenrokaiandClaude Fable 5
|
080bbe16dc |
Match exoplanet hosts on the sky, at both epochs the archive might mean
The host cross-reference matched in 3D, nearest star within half a parsec. That is the wrong space for the same reason the star merge learned it: a direction is measured, a distance is inferred. At 170 pc half a parsec is a ten-arcminute cone, wide enough to hand the planets of stars our catalogue does not carry to whatever bright star floats nearest — HATS-6 b sat on HD 39500, seventy arcseconds away. At 60 pc it is tighter than the routine disagreement between the archive's Hipparcos distances and our Gaia ones, which is how four bright giants (7 CMa, HD 81688, omi UMa, xi Aql) lost their planets and GJ 15 A's landed on a neighbouring entry. Hosts are now resolved like stars are merged: by name first, then the nearest star on the sky within a transverse budget — angle times the archive's distance, 0.01 pc — whose distance does not flatly contradict the archive's (the merge's own 50 % ratio). The budget is transverse because the dominant error is proper motion over an epoch difference, a physical displacement that is the same in parsecs at every distance: as an angle it is 60" for Proxima and 2" for a host at 100 pc. Measured on the 504 hosts whose archive name matches a catalogue name outright, true pairs reach 3.4e-3 pc; shifting every host a quarter of a degree finds nothing else within 0.01 but Proxima's own entry, whose budget at 1.3 pc is wider than the shift. The archive never says which epoch a position is for, and they are mixed: alf Tau and GJ 273 publish J2000, HD 133131 and TOI-2459 publish Gaia's J2016. So the query asks for sy_pmra/sy_pmdec too, tries each position at both ends of those sixteen years, and judges a star on whichever is closer. Guess one epoch and a fast star's planets land on a companion: J2016 puts Aldebaran's on Gl 171.1B, J2000 puts GJ 15 A's on a Gaia entry 15.9" out. 1 972 of 6 354 planets now sit on a host, 1 548 before: 432 gained, 26 on a better star (GJ 15 A to Groombridge 34, GJ 676 A off its companion, HD 19994 to 94 Cet), 8 lost — six false 3D matches to stars the catalogue never contained, and GJ 273 b/c, whose archive row says 5.92 pc for Luyten's Star at 3.79: a distance in flat contradiction is exactly what the ratio guard exists to refuse, and the number to fix is upstream. The 2 pc "rematch" apparatus is gone. build.ts recomputed every match after fetchExoplanets had already written the file — at a different tolerance, so the log reported a match count the data did not contain — and the offline entry point that persisted it had no caller. One matcher, one set of constants, used once. The archive cache is now keyed by a hash of the TAP query, so a response cached before the proper-motion columns cannot serve rows without them, where a missing cell would quietly read as "does not move"; the row's astrometry is stored with each planet, which is what made these tolerances measurable offline in the first place. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_016jxMkwA2rbicdGxHosecYi |
||
|
Claude
|
9a5e41495b |
Make a cold-cache ETL run a pure function of the archives
Two order dependencies surfaced while designing the scheduled refresh, both invisible on a developer machine with a warm cache and both guaranteed to haunt a weekly CI run that starts cold. The Exoplanet Archive query had no ORDER BY, so the archive was free to return rows in any order it liked — and exoplanets.json preserves row order, so a re-run could rewrite the file, and commit a diff, when nothing was actually published. Ordered by pl_name, which is unique among default_flag=1 rows, so the order is total. The deep-sky sort tie-broke with localeCompare, whose collation belongs to the ICU build of whichever Node runs the ETL. Compared code points instead: the file must not reorder because the runner's ICU disagrees with the machine that wrote it last. Both may reorder the committed files once, on the next real refresh. After that, byte-identity between runs means what it should: the archives published nothing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G |
||
|
Claude
|
29fd92d118 |
Widen the star catalogue, and separate what is drawn from what is known
The map held 8750 stars within 50 pc and rendered 371 systems. Both were lower than they needed to be, for different reasons. The star catalogue was capped by its own encoding as much as by the cutoff: one JSON object per star, eight key names repeated each time, 157 bytes a star. At the range HYG actually reaches that is 17 MB to download and parse before the first frame. So the numbers move into two binary column stores — positions in stars.bin, which the GPU is handed verbatim, and id/magnitude/colour/spectral index in stars-meta.bin — and the JSON keeps only the strings, with 2600 distinct spectral classifications collapsed to a dictionary. The layout is defined once, in star-catalog.ts, and the ETL and the app both use it, so the writer and the reader cannot drift. The cutoff then goes to 250 pc: 68388 stars, 7.8x as many for 1.7x the bytes. That is where HYG's measurements stop rather than a round number — 98.6% of its rows are Hipparcos, whose parallaxes are good to about a milliarcsecond, so beyond 250 pc it would be plotting noise. Drawing all of them is a separate question from knowing them, and it is answered separately. The field draws a budget: every star inside 25 pc, because the nearest are faint red dwarfs and Proxima Centauri is magnitude 11, then the brightest of everything beyond. Search, navigation and the planet cross-reference still see the whole catalogue. A real GPU would draw all 68388 without noticing; the budget is for the machines that would not, and it is one constant. Systems were limited by something else entirely. The archive data already shipped named 4735 host stars and only 388 resolved, because the rest lay outside a 50 pc catalogue — and the cross-reference kept only its own result, so redoing it meant re-downloading an archive that is not reachable from here. Host coordinates are now stored with each planet, and the match is re-resolved at build time against whatever catalogue the run produced. Even name matching alone, which needs no coordinates and so works on the records already shipped, rescues 335 planets across 238 systems: 371 renderable systems become 609. Two selection rules were tuned for a 50 pc bubble and no longer fit. Tethers followed the Sun's nearest neighbours, which are a speck at this range, and now follow the brightest; labels were ranked by proximity, which named whatever sat nearest the middle of the screen, and are now ranked by brightness — so the view names Canopus, Achernar and Spica rather than a clump of catalogue designations. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G |
||
|
Claude
|
8d8c65bdb2 |
Propagate exoplanets with their real orbital period
Every exoplanet was propagated with gmForParent(undefined) — the Sun's gravitational parameter — so the whole catalogue orbited as though each host were exactly one solar mass. Most hosts are red dwarfs far lighter than that, and a heavier central mass pulls harder and shortens the period, so their planets were whirling round much too fast: TRAPPIST-1 is 0.09 solar masses, and its planets were completing an orbit in roughly a third of the true time. pl_orbper was already in the TAP query and was being discarded on the way into the record. It is now kept, along with st_mass. A period and a semi-major axis together pin the host's gravitational parameter exactly, via GM = n^2 a^3 — no stellar model, no assumption, just the inverse of the orbitalPeriodDays helper that was already there. resolveGravitationalParameter picks the best available source: the measured period, else the published host mass, else one solar mass as before. A derived value implying something outside 0.01-150 solar masses is rejected and falls through, since a period and axis taken from disagreeing solutions would otherwise send a planet spinning at a visibly absurd rate. Note the direction of the error, which is the opposite of what it looks like: assuming a *heavier* host than reality makes a planet orbit *faster*. A test pins it, and caught me stating it backwards first. The NASA Exoplanet Archive is unreachable from this environment (egress policy returns 403 on CONNECT), so exoplanets.json cannot be regenerated here and still carries no periods. Behaviour is therefore unchanged until `npm run etl` is run somewhere with archive access, at which point every planet with a published period starts moving correctly with no further code changes. build.ts reports how many records gained a period, and rejects non-positive ones. Tests: 171 passing, up from 151, including a new end-to-end check that TRAPPIST-1 b with its real period completes exactly one orbit in 1.51088 days and sits a full diameter away at half that. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G |
||
|
Claude
|
4aca223027 |
Regenerate the star catalogue, fixing 2331 names and 875 colours
Two ETL bugs, both fixed at the source and then re-run against HYG. Star ids,
ordering and positions are all unchanged, so stars.bin is byte-identical and
every exoplanet cross-reference still resolves.
Names. HYG's `gl` column already carries its own catalogue prefix ("Gl 581",
"GJ 3512"), unlike the bare numbers in `hd` and `hip`, so prefixing it again
produced 2331 of 8750 stars named "Gl GJ 1076". That corrupted three surfaces at
once: search, the on-screen labels, and exoplanet host-star name matching, which
compares normalised names and could never match "glgj1076" to "gj1076".
Colours. `Number(row['ci']) || 0` cannot tell a blank cell from a real zero, and
0 is a real B-V colour index meaning a hot blue-white A-type star. All 875
affected stars turned out to be blanks — the catalogue contains no genuine zero
inside the distance cutoff — so several hundred red dwarfs were rendering
blue-white. colorIndex is now `number | null` rather than defaulted, because any
numeric default is indistinguishable from a measurement.
Consumers resolve the gap from the spectral type instead. That needs real
parsing: HYG's `spect` column runs to 134 distinct spellings among the affected
stars alone, including a bare lowercase "m" for 354 of them, plus "k-m" ranges,
"dM4" luminosity prefixes and "K:" uncertainty flags. 622 of the 875 recover a
class this way — 497 of them M-class — and the remaining 253, which carry no
classification at all, fall back to neutral white.
The parse is anchored at the start of the string rather than scanning it. A scan
is the obvious implementation and is quietly wrong: the ETL writes the literal
"Unknown" for unclassified stars, that contains a K, and every one of those 253
would have been classified as an orange K-type. A test covers it.
Also lifts parseOptionalNumber out of fetchExoplanets into lib/csv, where both
fetchers now use it, and gives magnitude a faint default instead of 0 — no
current star is affected, but 0 would mean "as bright as Vega" and render an
unphotometered star as one of the largest points on the map.
Tests: 145 passing, up from 116, including the first coverage of
StarFieldRenderer. Build, both typechecks and the Playwright suite are green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G
|
||
|
Claude
|
06cf7d2a15 |
Fix four defects a user hits in the first minute
Found by surveying the codebase against the plan; each was verified against the
committed assets or the running app before being touched.
TRAPPIST-1 was orbiting the Sun. The Exoplanet Archive leaves sy_dist blank for
some systems, and fetchExoplanets.ts read it with bare Number() — Number('') is
0, which is finite, so it slipped past the Number.isFinite guard in
resolveHostStarId, placed the host at the origin, and matched Sol at distance
exactly 0. 127 records shipped with hostStarId 0, all seven TRAPPIST-1 planets
among them, and the system view filters on that id, so drilling into Sol drew
127 alien worlds inside the real solar system.
Fixed in three places: resolveHostStarId now rejects a non-positive distance
(the robust guard, covering every caller), fetchExoplanets.ts uses the
parseOptionalNumber that already sat unused in that same file for ra/dec/dist,
and validateExoplanets asserts nothing ever resolves to the Sun again — the Sun
has no exoplanets, so that tripwire costs nothing and is permanent.
The archive's endpoint is blocked by this environment's egress policy, so the
ETL cannot be re-run here. The committed asset was corrected in place instead,
which is safe because the outcome is deterministic: the name path runs first and
none of the 127 resolve by name, so all of them reached id 0 positionally and
the fixed pipeline yields null for exactly that set. Cross-referenced hosts drop
from 761 to 634; record count is unchanged.
Dragging to rotate selected stars. Selection was bound to the raw click event,
which browsers fire on release however far the pointer travelled and which
OrbitControls does not suppress — so any drag ending over a star launched a
camera flight, and in system view routed away to /body/:id. Now tracks
pointerdown and ignores a release more than 5 px from it.
Ghost systems accumulated on every star-to-star hop. SystemOrbitsRenderer.dispose
released geometries and materials but never detached its group, so old orbit
lines stayed parented forever — still traversed and re-uploaded each frame with
disposed geometries, drawn over the new system and unpickable. dispose() now
detaches and clears.
Galaxy star labels stayed pinned inside the system view. They are CSS2D objects
parented to the scene rather than to galaxyGroup, so hiding the group left up to
15 parsec-space names clumped over the system's star. Cleared on entry. Also
gated the per-frame Kepler propagation on actually being in a system; it ran in
galaxy view too, because the renderer is never nulled on exit.
Tests: 116 passing, up from 112. Build, both typechecks and the Playwright suite
are green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G
|
||
|
Senrokai
|
d7e8ea1d4d |
@
Add star-map Angular app, ETL pipeline, and caveman plugin Angular 3D star map (galaxy/system/body views, Three.js rendering, navigation store) plus the NASA ETL tooling that builds the star, exoplanet and solar-system datasets, Playwright e2e suite, and the cs:caveman Claude Code plugin (command, agent, skill). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> @ |