6019987fc416a4a4721fe6177e70e067b7db65b1
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Claude
|
8d8c65bdb2 |
Propagate exoplanets with their real orbital period
Every exoplanet was propagated with gmForParent(undefined) — the Sun's gravitational parameter — so the whole catalogue orbited as though each host were exactly one solar mass. Most hosts are red dwarfs far lighter than that, and a heavier central mass pulls harder and shortens the period, so their planets were whirling round much too fast: TRAPPIST-1 is 0.09 solar masses, and its planets were completing an orbit in roughly a third of the true time. pl_orbper was already in the TAP query and was being discarded on the way into the record. It is now kept, along with st_mass. A period and a semi-major axis together pin the host's gravitational parameter exactly, via GM = n^2 a^3 — no stellar model, no assumption, just the inverse of the orbitalPeriodDays helper that was already there. resolveGravitationalParameter picks the best available source: the measured period, else the published host mass, else one solar mass as before. A derived value implying something outside 0.01-150 solar masses is rejected and falls through, since a period and axis taken from disagreeing solutions would otherwise send a planet spinning at a visibly absurd rate. Note the direction of the error, which is the opposite of what it looks like: assuming a *heavier* host than reality makes a planet orbit *faster*. A test pins it, and caught me stating it backwards first. The NASA Exoplanet Archive is unreachable from this environment (egress policy returns 403 on CONNECT), so exoplanets.json cannot be regenerated here and still carries no periods. Behaviour is therefore unchanged until `npm run etl` is run somewhere with archive access, at which point every planet with a published period starts moving correctly with no further code changes. build.ts reports how many records gained a period, and rejects non-positive ones. Tests: 171 passing, up from 151, including a new end-to-end check that TRAPPIST-1 b with its real period completes exactly one orbit in 1.51088 days and sits a full diameter away at half that. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G |
||
|
Claude
|
4aca223027 |
Regenerate the star catalogue, fixing 2331 names and 875 colours
Two ETL bugs, both fixed at the source and then re-run against HYG. Star ids,
ordering and positions are all unchanged, so stars.bin is byte-identical and
every exoplanet cross-reference still resolves.
Names. HYG's `gl` column already carries its own catalogue prefix ("Gl 581",
"GJ 3512"), unlike the bare numbers in `hd` and `hip`, so prefixing it again
produced 2331 of 8750 stars named "Gl GJ 1076". That corrupted three surfaces at
once: search, the on-screen labels, and exoplanet host-star name matching, which
compares normalised names and could never match "glgj1076" to "gj1076".
Colours. `Number(row['ci']) || 0` cannot tell a blank cell from a real zero, and
0 is a real B-V colour index meaning a hot blue-white A-type star. All 875
affected stars turned out to be blanks — the catalogue contains no genuine zero
inside the distance cutoff — so several hundred red dwarfs were rendering
blue-white. colorIndex is now `number | null` rather than defaulted, because any
numeric default is indistinguishable from a measurement.
Consumers resolve the gap from the spectral type instead. That needs real
parsing: HYG's `spect` column runs to 134 distinct spellings among the affected
stars alone, including a bare lowercase "m" for 354 of them, plus "k-m" ranges,
"dM4" luminosity prefixes and "K:" uncertainty flags. 622 of the 875 recover a
class this way — 497 of them M-class — and the remaining 253, which carry no
classification at all, fall back to neutral white.
The parse is anchored at the start of the string rather than scanning it. A scan
is the obvious implementation and is quietly wrong: the ETL writes the literal
"Unknown" for unclassified stars, that contains a K, and every one of those 253
would have been classified as an orange K-type. A test covers it.
Also lifts parseOptionalNumber out of fetchExoplanets into lib/csv, where both
fetchers now use it, and gives magnitude a faint default instead of 0 — no
current star is affected, but 0 would mean "as bright as Vega" and render an
unphotometered star as one of the largest points on the map.
Tests: 145 passing, up from 116, including the first coverage of
StarFieldRenderer. Build, both typechecks and the Playwright suite are green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G
|
||
|
Claude
|
06cf7d2a15 |
Fix four defects a user hits in the first minute
Found by surveying the codebase against the plan; each was verified against the
committed assets or the running app before being touched.
TRAPPIST-1 was orbiting the Sun. The Exoplanet Archive leaves sy_dist blank for
some systems, and fetchExoplanets.ts read it with bare Number() — Number('') is
0, which is finite, so it slipped past the Number.isFinite guard in
resolveHostStarId, placed the host at the origin, and matched Sol at distance
exactly 0. 127 records shipped with hostStarId 0, all seven TRAPPIST-1 planets
among them, and the system view filters on that id, so drilling into Sol drew
127 alien worlds inside the real solar system.
Fixed in three places: resolveHostStarId now rejects a non-positive distance
(the robust guard, covering every caller), fetchExoplanets.ts uses the
parseOptionalNumber that already sat unused in that same file for ra/dec/dist,
and validateExoplanets asserts nothing ever resolves to the Sun again — the Sun
has no exoplanets, so that tripwire costs nothing and is permanent.
The archive's endpoint is blocked by this environment's egress policy, so the
ETL cannot be re-run here. The committed asset was corrected in place instead,
which is safe because the outcome is deterministic: the name path runs first and
none of the 127 resolve by name, so all of them reached id 0 positionally and
the fixed pipeline yields null for exactly that set. Cross-referenced hosts drop
from 761 to 634; record count is unchanged.
Dragging to rotate selected stars. Selection was bound to the raw click event,
which browsers fire on release however far the pointer travelled and which
OrbitControls does not suppress — so any drag ending over a star launched a
camera flight, and in system view routed away to /body/:id. Now tracks
pointerdown and ignores a release more than 5 px from it.
Ghost systems accumulated on every star-to-star hop. SystemOrbitsRenderer.dispose
released geometries and materials but never detached its group, so old orbit
lines stayed parented forever — still traversed and re-uploaded each frame with
disposed geometries, drawn over the new system and unpickable. dispose() now
detaches and clears.
Galaxy star labels stayed pinned inside the system view. They are CSS2D objects
parented to the scene rather than to galaxyGroup, so hiding the group left up to
15 parsec-space names clumped over the system's star. Cleared on entry. Also
gated the per-frame Kepler propagation on actually being in a system; it ran in
galaxy view too, because the renderer is never nulled on exit.
Tests: 116 passing, up from 112. Build, both typechecks and the Playwright suite
are green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G
|
||
|
Claude
|
3a859360ba |
Add the deep-sky backdrop, the last unbuilt piece of the plan
The design doc scopes deep-sky objects as a galaxy-view backdrop and lists fetchDeepSky.ts, deepsky.json and deepsky.model.ts, but none of it existed — it was the only part of the plan with no implementation behind it. ETL: fetchDeepSky.ts pulls the OpenNGC catalog, classifies each object as a galaxy/nebula/cluster, and keeps the ~460 worth drawing (everything Messier, everything with a common name, and anything brighter than magnitude 9) out of ~12,000 mostly-anonymous rows. build.ts runs it and validates the output. Distances are the hard part: OpenNGC has no distance column, and both fallbacks fail for the best-known objects. M31, M33 and M42 are Local Group members whose redshift is negative or absent, and a galaxy's catalog parallax comes from a cross-matched foreground star — 6 mas for M31 would put a 780 kpc galaxy at 167 pc. So records store a unit direction on the celestial sphere rather than a position (the line of sight is always known precisely, and the objects are drawn on a fixed backdrop shell where true distance is unusable anyway), and distance is optional metadata carrying its own provenance. Parallax is trusted only for galactic objects, redshift only above z=0.003 where expansion outweighs peculiar velocity. 330 of 463 get a distance; the rest honestly report none. Rendering: DeepSkyRenderer paints the objects as soft additive billboards on a 2500 pc shell — clear of the 50 pc star field, beyond the camera's 2000 pc orbit limit, and inside its 5000 pc far plane. Size comes from real angular extent, so Andromeda is six times wider than the full Moon, clamped at both ends. Sprites rather than points because the WebGPU backend caps point primitives at one pixel; materials are shared per kind and brightness band, so 460 objects cost nine of them. The brightest dozen get permanent labels, which needed the label overlay to accept string ids alongside numeric star ids. The backdrop is decorative, so a failure to load its dataset is logged and the star field comes up regardless. Also documents the app in the README, which until now covered only the plugin marketplace. Tests: 112 passing, up from 54. Build, both typechecks and the Playwright suite are green. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WaySiNst4HhDXBHnMy8p5G |
||
 Senrokai
|
d7e8ea1d4d |
@
Add star-map Angular app, ETL pipeline, and caveman plugin Angular 3D star map (galaxy/system/body views, Three.js rendering, navigation store) plus the NASA ETL tooling that builds the star, exoplanet and solar-system datasets, Playwright e2e suite, and the cs:caveman Claude Code plugin (command, agent, skill). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> @ |